Netac Tech t610 Manuel d'utilisateur télécharger pdf (Page 22)

Netac AirTrack T610 Wireless Broadband Router

Password user name and password.

Status The relevant information for WAN connection.

3.4 LAN

Figure 3.4 LAN Page

Table 3.4 LAN Configurations

Field Description

IP Address

Set the IP address of T610. Default: 192.168.1.1.

Note: To configure T610, the user must access T610 from a PC that is on the

same subnet.

Subnet Mask Allow the user to specify a subnet mask. Default: 255.255.255.0.

Enable DHCP Service Disable/Enable DHCP server.

Start IP Address Set the starting IP address of DHCP server's IP address. Default: 192.168.1.100.

End IP Address Set the ending IP address of DHCP server's IP address. Default: 192.168.1.150.

DHCP lease Set the effective time of the IP address assigned by DHCP server.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 38 39

Pas de commentaire

Netac Tech t610 Manuel d'utilisateur Page 22